Gear cutting machines

Spiral Bevel Gear Cutting Machine

OERLIKON

SKM 1

Picture not available!

DESCRIPTION

Tooth width max. 50 mm
Adjustment range for hypoid wheels (offset) +/- 60 mm.
Through hole for spindle pieces 78 mm.
Plunge max 20 mm.
Feed rates for cutting, infinitely variable 0.04 - 25 mm/min.
Distance taper tip/workpiece spindle... 100 - 345 mm.
Distance taper centre/knife head axis 25 - 150 mm.
Distance taper centre/milling head spindle... 80 - 220 mm.
Max. disc wheel Ø with medium spiral angle... 320 mm.
Max. Gear ratio 1 : 9.5
Module 2.1 - 7.5
Outer bevel distance approx. 170 mm.
Rapid traverse 1.5 m/min.
Roller feeds in minutes from angle pe... 0,3 - 20
Spindle nose with short taper, inside 140 mm.
Spindle nose with short taper, outside 85 mm.
Spindle speeds in standardised steps 40-250 rpm.
Rotation around the machine centre axis 90º
Ø max. gearbox 320 mm.
Ø of spindle nose 130 mm
Electrical properties
Motor cooling capacity 1.2 Cv.
Main motor power 10 Cv.
Motor power chip conveyor 0.3 HP.
Forward motor power 2 HP.
Hydraulic motor power 2 HP.
Total power 13 Kw.
Voltage 220/380V.

TECHNICAL DETAILS

  • max. wheel diameter 320 mm
  • gear width 50 mm
  • max. modules 7,5
  • min. module 2,1
  • total power requirement 13 kW
  • weight of the machine approx. 7 t
  • dimensions of the machine approx. 1,7 x 1,9 x 2,7 m

Used

From location

2077-90037

GALLERY

Take a look at the machine in detail

Picture not available!
Picture not available!
Picture not available!
Picture not available!
Picture not available!
Picture not available!
Picture not available!
Picture not available!
Picture not available!

VIDEOS

If available, you can see the videos of the ad here

All information is without guarantee of correctness and completeness.

Subscribe to our newsletter

Also to be found under:

logotech_dealershipblacklogotech_dealershipblacklogotech_dealershipblack
Registred partner of
BearingMachines.com
en_GBEN
Cookie Consent Banner by Real Cookie Banner