Stock number: 2077-90037
Technical data
| Wheel diameter - max. 320 mm | |
| Wheel width 50 mm | |
| Module - max. 7.5 | |
| Module - min. 2.1 | |
| More information on the product page |
Description of the
Wheel diameter - max. 320 mm
Wheel width 50 mm
Module - max. 7.5
Module - min. 2.1
Total power requirement 13 kW
Machine weight approx. 7 tonnes
Space requirement approx. 1.7 x 1.9 x 2.7 m
Max. tooth width 50 mm Adjustment range for hypoid gears (offset) +/- 60 mm. Through hole spindle pieces 78 mm. Plunge depth max 20 mm. Feed rates for hobbing, stepless 0.04 - 25 mm/min. Distance nose/work spindle... 100 - 345 mm. Distance nose centre/milling head axis 25 - 150 mm. Distance nose centre/milling head spindle... 80 - 220 mm. Max. ring gear diameter at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer bearing centre distance approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes from angle meas... 0.3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, outside 85 mm. Spindle speeds in standardised steps 40-250 rpm. Rotation around the machine's central axis 90º Max. gear diameter 320 mm. Spindle nose diameter 130 mm Electrical characteristics Motor cooling output 1.2 hp. Main motor output 10 hp. Chip conveyor motor output 0.3 hp. Forward motor output 2 hp. Hydraulic motor output 2 hp. Total output 13 kW. Voltage 220/380V.
Wheel width 50 mm
Module - max. 7.5
Module - min. 2.1
Total power requirement 13 kW
Machine weight approx. 7 tonnes
Space requirement approx. 1.7 x 1.9 x 2.7 m
Max. tooth width 50 mm Adjustment range for hypoid gears (offset) +/- 60 mm. Through hole spindle pieces 78 mm. Plunge depth max 20 mm. Feed rates for hobbing, stepless 0.04 - 25 mm/min. Distance nose/work spindle... 100 - 345 mm. Distance nose centre/milling head axis 25 - 150 mm. Distance nose centre/milling head spindle... 80 - 220 mm. Max. ring gear diameter at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer bearing centre distance approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes from angle meas... 0.3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, outside 85 mm. Spindle speeds in standardised steps 40-250 rpm. Rotation around the machine's central axis 90º Max. gear diameter 320 mm. Spindle nose diameter 130 mm Electrical characteristics Motor cooling output 1.2 hp. Main motor output 10 hp. Chip conveyor motor output 0.3 hp. Forward motor output 2 hp. Hydraulic motor output 2 hp. Total output 13 kW. Voltage 220/380V.